Non woven fabric surface center winding and slitting machine

Main technical parameters

1. Machine speed: 0-250 m/min (specific cutting speed depends on material, thickness, product quality requirements, and operator proficiency)

2. Incoming width range: 400mm-1000mm

3. Incoming diameter: Within 800mm

4. Inner diameter of unwinding tube core: 3 "(provided by the ordering party for tube core inner diameter or tube sample)

5. Inner diameter of the winding tube core: 3 "(the ordering party shall provide the inner diameter or sample of the tube core)

6. Incoming roll weight: Within 500kg

7. Striped finished product width: 5mm or more (depending on material, thickness, and winding diameter)

8. Striped finished product width error: within ± 0.2mm (using the circular cutting tools and washers provided by our company)

9. Winding diameter: Within 650mm (depending on material, thickness, and winding diameter)

10. Total power of equipment: 13KW 380V 50HZ

11. The required compressed air pressure for the equipment is above 6kg/c ㎡,

12. Equipment power supply: 380V (± 5%) -4-wire 50HZ,

12. Cutting substrates: aluminum-plastic composite film, PET film, BOPP film, etc.

13. Thickness of cutting substrate: Lightweight non-woven fabric, aluminum foil Mylar (0.025mm-0.08mm), BOPP film (0.01mm-0.1mm). The equipment configuration and cutting tools may vary depending on the material or thickness.